Keep your pet cool with the Cool Comfort Mat! Using evaporative cooling, this non-toxic mat features a waterproof exterior, air mesh lining, and a super-absorbent interior. Just unzip, add cold water, zip, squeeze, and lay it out for instant cooling.

Explore the details

Evaporative cooling technology helps keep pets comfortable in hot weather
Made from non-toxic materials, free from gel, eliminating risk of poisoning in case of chewing or ingestion
3 layers: waterproof shell, breathable air mesh lining, & an interior layer that absorbs up to 3x its own weight
Can be folded into itself for easy transportation & storage
Easy to wipe clean & machine washable
Stays cool for approximately 1 hour (dependent on environmental conditions) & can be placed in refrigerator for extra cooling effect

SIZING
HOW TO USE
HOW TO WORKS
CARE / MATERIAL

Size

Width
(CLOSED DIMENSIONS)

Height
(CLOSED DIMENSIONS)

One size

8.1"

13.4"

Size

Width
(OPENED DIMENSIONS)

Height
(OPENED DIMENSIONS)

One size

32.5"

26.75"

Size

Width
(CLOSED DIMENSIONS)

Height
(CLOSED DIMENSIONS)

One Size

20.6 cms

34 cms

Size

Width
(OPENED DIMENSIONS)

Height
(OPENED DIMENSIONS)

One Size

82.5 cms

68 cms

HOW TO USE

Open zipper and pour a maximum of 710 ml (24 oz) of water through the opening. Do not exceed capacity as this can cause excess water to leak out from the seams.
Close zipper.
Squeeze mat to distribute water evenly across the mat. Minor water seepage at the seams is normal.
Place a towel under the mat if you are using it indoors to avoid direct contact with the floor.
For extra cooling, place mat in the refrigerator. Remove mat for a few minutes before use.
After each use, turn mat inside out and hang to dry. Refer to care label for washing instructions.

*Always keep an eye on your pet to look for signs of overheating, even when using this product. For indoor use, we recommend placing a towel underneath in case of minor water seepage at the seams. Avoid placing the mat in the freezer as it may become excessively cold for your pet.

HOW TO USE

1. Open zipper and pour a maximum of 710 ml (24 oz) of water through the opening. Do not exceed capacity as this can cause excess water to leak out from the seams.

2. Close zipper.

3. Squeeze mat to distribute water evenly across the mat. Minor water seepage at the seams is normal.

4. Place a towel under the mat if you are using it indoors to avoid direct contact with the floor.

5. For extra cooling, place mat in the refrigerator. Remove mat for a few minutes before use.

6. After each use, turn mat inside out and hang to dry. Refer to care label for washing instructions.

What is evaporative cooling and how does it work? Evaporative cooling is a natural process where water transitions from a liquid to vapour, absorbing heat from its surroundings and creating a cooling effect. The Cool Comfort Mat leverages this principle by featuring a super-absorbent interior layer that soaks in cold water. As this water gradually evaporates from the material, it carries away heat, delivering a sustained and effective cooling experience.

How long does it last? The cooling effect lasts for approximately one hour, depending on temperature, weather conditions and other environmental factors. Generally, the evaporative cooling process performs best in hot and dry climates away from direct sunlight. High-humidity environments may hinder evaporation and limit the desired effect.

How do I know when to re-wet? When the mat no longer feels cool, re-wet to reactivate the cooling effect.

CARE

Note: Follow these care instructions to prevent odour and/or mould development.

After each use, wipe the exterior clean as needed, turn mat inside out and hang to dry.
For a deeper clean, make sure the zipper is fastened and machine wash in cold water with items of a similar colour, then turn mat inside out and hang to dry.
Ensure mat is completely dry before storing.